Search

Archive for February 2012

,
0 comments

WANT TO KNOW WHO USED YOUR PC IN YOUR ABSENCE


Want to know Who Used Your Pc In Your Absence & what Did He Do?

just follow these simple steps

start > run >eventvwr.msc



Events are stored in three log files: Application, Security, and System.

These logs can be reviewed and archived.

For our purposes we want the System log. Click on "System" in the left-hand column for a list of events.

Look for a date and time when you weren't home and your computer should have been off.

double click on the eg: info n it will show u the detail.

You can also use this log to see how long someone was on the computer.

Just look at the time the computer was turned on and off for that day.

Read More
,
0 comments

CREATE YOUR OWN FONTS IN WINDOWS


If you want to make your own fonts in window then
just follow these steps.
1.First go to start>Run 
2.Type here eudcedit and hit enter.
    it will display like the below blox....




Now use your creativity & make your own fonts.

Read More
,
1 comments

MATRIX LIKE EFFECT ON YOUR DOS

Follow the blow step......

1. Open Notepad.
2.Copy the below mentioned text in your notepad file:

" @echo off
color 02
:start
echo %random% %random% %random% %random% %random% %random% %random% %random% %random% %random%
goto start "


Paste the code in between the inverted comas....


3. Save the file with .bat extension like Mat.bat
 Double click on the "Mat file".Then you will watch what will appear on Dos



Read More
,
0 comments

Install Windows XP in Less than 15 Minutes


 
 
 
 
 
 
 
Windows XP operating system is most popular operating system and frequently installed . Normally OS installation takes around 40 minutes to complete, but by using this trick you can now save 10-15 minutes.

1. Boot through Windows XP CD.

2. When all the files are completely loaded, choose option to select the partition. Select “c”.Where ever you want to install your windows.

3. Now Format the partition, whether it is normal or quick with NTFS or FAT.

4. Once the formatting is completed, All the setup files required for installation are copied. Restart your system by pressing Enter.
Now, here begins the Simple trick to save 10-15 minutes.

5. After rebooting, you get a screen which shows 40 minutes to complete OS installation.
 
 

6. Now, Press SHIFT + F10 Key -> This opens command prompt.

7. Enter “Taskmgr” at the command prompt window. This will open Task Manager.

8. Click the Process Tab, here we find a process called Setup.exe -> Right Click on Setup.exe -> Set Priority -> Select High or Above Normal. Initially it will be Normal.
Thats it, no more work to do. Relax your self and see how fast the installation process completes. 
(ALL THIS DEPEND ON YOUR RAM)
 Share your ideas in comments.

Read More
,
1 comments

Command Prompt on Right-Click



 

 

 

Follow this steps to get command prompt on your right click..
  1. Start > Run
  2. Enter "regedit" and hit Enter
  3. Expand to "HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Folder\shell"
  4. Right-click on "shell" and select New > Key
  5. Make sure a new key is created under "shell". Change the name of this key to "Command Prompt"
  6. Right-click on this new key "Command Prompt" and select New > Key
  7. Change the name of this key to "command"
  8. Here's what we should have:
  9. Double-click on the "(Default)" text on the right window to bring up the edit box
  10. Enter this text into the Value Data field:
    cmd.exe "%1"
  11. Click OK and close the registry.  

Read More
,
0 comments

Hide Files or Folders Using Command Prompt



















You hide your files in your system no buddy can see that file.....
  1. Press windowkey+R: Run command dialog box appears.
  2. Now type "cmd" and hit enter. A command prompt window displays.
  3. Now type "attrib +s +h <Address Bar of your computer>" and hit enter.
  4. Example:-"atrrid +s +h  D:\kvr" like this..
  5. The folder "kvr folder" will be hidden (Note: It cannot be viewed by any search options)
  6. If you want that folder reback then type this command "attrib -s -h <Address Bar of your computer>" and hit enter.
  7. Example:-"attrid -s -h  D:\kvr" like this..
      (To view this folder again, use the same command but replace '+' with '-' on both flags 's' and 'h')

Read More
,
0 comments

Create Ghost Bootable SD Card or USB Flash Drive


The good news: Almost every recent laptop/netbook comes with a card reader, and even if you wasn't lucky enough, your laptop/netbook should have a USB port!

This guide will tell you how to create a bootable SD card or a USB flash drive with Symantec Norton Ghost.
This task can be done with several different versions of Symantec Ghost; however, the steps from this articles are based on Symantec Ghost 14.


What you need?
  • Symantec Ghost 14 bootable CD. (Some other versions might also work)
  • A PC with bootable CD/DVD drive.
  • An SD card (either SD or SDHC), or a USB thumb drive. The size can be as minimum as 1 GB. You can also pick a large SD card if you want to store your hard drive image to the card as well.
  • An SD slot or a card reader (for SD card) or a USB slot (for thumb drive) 
 Use the following  steps
  1. First, check to make sure your CD/DVD drive is bootable. (See your BIOS manual or PC user guide for details since this is out of the scope of this article).
  2. - For SD card: Make sure the SD slot or the card reader is available. if it's a card reader, connect it to the PC. Also insert the card.
    - For USB thumb drive: Make sure the drive is inserted into one of the USB slots.
  3. Bootup the computer using the Symantec Ghost CD (Details vary on different computers). On Windows XP, during the startup, you should see the prompt "Press any key to boot from CD...".
  4. Once the Symantec Recovery startup is complete, you should see the main screen of Symantec Ghost 14 Recovery similar to this image:

 
  5.  Select "Analyze" from the left menu.



  1. Then click on "Open Command Shell Window". A command prompt window will display.

  2. At this command prompt window, type: "diskpart" (one word, without quotes) and hit enter. The prompt now changed to "DISKPART>"

  3. Now type "list disk" and hit enter. You should now see a list of all available disks. Base on the size of each disk listed, find the one that matching your SD card (or thumb drive) and note its disk number under "Disk ###". If you don't see your SD card (or flash drive) listed, verify if it is inserted or plugged in (you might need to restart the computer and try again).
  4. Type "select disk <n>" (replace <n> with the disk # noted from the previous step) then hit enter.
    Important!! Besure to select the correct disk (your SD card or thumb drive) as you will be erasing the drive.
    Sample image with a 4-GB SD selected:






  2. Create a primary partition for the the disk by executing the following sequence of commands:
    clean
    create partition primary
    select partition 1

  3. Set the primary partition active, type: "active" and hit enter

  4. Perform a quick format with the following command:
    format fs=fat32 quick

  5. Then type:
    assign
    exit

  6. Your SD card (or the flash drive) is now bootable and will act similar to a local hard drive. In order to boot this card with Symantect Ghost Recovery, copy all contents from the Symantec Ghost disc to the SD card (or the flash drive). Besure to copy everything including any hidden files/folders.

    The SD card or flash drive is now bootable and will boot your laptop/netbook to Symantec Ghost Recovery utilities exactly the same way as of the CD (To boot with the card on your laptop/netbook, don't forget to set your bios to search for the SD card or USB external devices in the boot sequence).

Read More